Stereo96 ADC/ Stereo96 DAC

제목 없음

Stereo96 ADC/ Stereo96 DAC

일반적인 랙사이즈의 1/3 정도의 크기이며, Stereo96 AD DA 컨버터는 최고 품질의 변환을 필요로하는 마스터링이나 레코딩 스튜디오에 다양하게 사용될 수 있습니다. 2채널의 하이엔드 퀄러티를 선보이며 오리지널 시그널 퀄러티를 보존해야 하는 중대한 프로젝트에 알맞습니다.

Stereo96 ADC

- 44.1, 48, 88.2 and 96kHz internal sampling frequencies
- Ext. wordclock sync 25-100kHz or 256x Superclock(tm)
- 120dB Dynamic Range
- 24 bit resolution
- High performance SuperShaper-HR™ psychoacoustic  noiseshaping algorithm for 16 bit output
- Switchable precision 10 turn-trimpots or input gain knob
- Wordclock output can be used as a hi-end house clock.

Stereo96 ADC Specifications

Conversion : Linear PCM,  128x oversampling at 44.1/48kHz 64x oversampling at 88.2/96kHz

Resolution : 24 bit

Sample rates : 44.1kHz, 48kHz, 88.2kHz, 96kHz or wordclock 25-100kHz

Dynamic Range : 120dB A-weighted, 117dB Total

THD+Noise : -105dB (<0.0005%)

Internal clock jitter : <10picoseconds

Analog Inputs : +4dBm balanced or unbalanced, 10kOhm

Digital outputs : Hi-speed (25-100kHz) AES/EBU and SPDIF

External Sync. : Wordclock in and out. or 256x Superclock Wordlock Out used as house clock: 15 LS TTL loads max. Can be terminated.

Mains : 100/115V-220/240V 50/60Hz switchable

Dimensions : 1/3 rack space wide x 1U high x 8” deep
(5.5”x 1.6”x 8”)

Weight : 3.5 pounds

Stereo96 DAC

Stereo96 DAC features include:

* Jitter free operation with SuperLock (tm) technology. In SuperLock (tm) mode ultra stable 10ps internal clock allows for D/A conversion of incoming signals of any sample rate with 192K sampling bandwidth. This method provides 100% immunity to source jitter and relaxed filtering with 100kHz bandwidth.

* Same converter chip and specs as 8X96 DAC

* Transparent high current, high performance headphone amp

* Volume control assignable to headphones and analog outputs (for plugging your digital monitoring directly into power amp for ultimate sound transparency)

* External or internal sync.

* Accepts up to 192k single wire input on internal sync, and up to 96k on external sync.

* Stereo level meter with true over detection

Stereo96 DAC Specifications

2-channel, 24bit, PCM 192-kHz D-to-A conversion in SuperLock(tm) mode

( 96-kHz D-to-A conversion in input sync mode when digital input sync is used)              

All sample rates playback with 100-kHz analog bandwidth in SuperLock(tm) mode

THD+N = -107 dB (0.0005%)

120 dB Dynamic Range A-weighted

AES/EBU and S/PDIF hi speed digital inputs (25-200kHz)

Digital input source-selection switch

Balanced, +4dB outputs (+29 dBu) with adjustable gain trimpots

Unbalanced operation with consumer levels

Variable or preset output level controls, switch selectable with high performance conductive plastic attenuator

Direct connection to powered monitors, the built in attenuator can be used as volume control

high performance conductive plastic attenuator

Built-in 0.5A high current drive, hi-speed headphone amplifier

Total jitter immunity via Superlock™ technology

Phase Accurate D-to-A conversion across any number of channels

LED Bargraph true digital peak meter

Internal low-radiation oversized toroidal power supply

International 115-230 input voltage range

Power switch on the front panel

Automatic De-emphasis

Milled aluminum front panel

1/3 wide, 1RU chassis

Rack mount 1U shelf available

CE Compliant

또한, Stereo192 ADC는 Stereo96ADC의 확장 모델로, 최대 192kHz의 샘플 레이트를 범위를 가지고 있습니다. 아래는 Stereo192ADC와 Stereo96ADC의 차이점입니다.

-    up to 192k operation (for playback at 192k check Stereo96DAC or 8X192 ADDA)
-    ability to work on Battery Power
-    ultra hi-end audiophile grade front end featuring large solid state capacitors (instead of electrolytics)
-     Trimpots/knob switchable on front panel
-     No 16/20 bit output (only 24)



번호 제목
    Studioclock192 CX
    Stereo192 SRC
    Stereo96 ADC/ Stereo96 DAC
    8X192 Series AD/DA
Copyright 1999-2016 Zeroboard / skin by DQ'Style